piwik image

ECSR100 Edison
Send Print
  1. pin-int


EATON Edison Bullet™ ECSR100 Current Limiting Time Delay Fuse, 100 A, 600 VAC, 200 kA Interrupt, RK5 Class, Bullet/Cylindrical Body

  • Manufacturers: Eaton
  • Brand Name: Edison
  • MPN: ECSR100
  • UPC:782634508434
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

ECNR/ECSR dual element fuses are recommended for AC power distribution system mains, feeders and branch circuits having inductive loads (motors, transformers) or non-inductive loads (lighting, heating) where the available short circuit current does not exceed 200000 rms symmetrical amperes. These dual element, time delay fuses have minimum industry standard time delay of 10 sec at 5 times the fuse rating (8 sec minimum for 250 VAC, 30 A and less). The time delay characteristics of these fuses typically allows them to be sized closer to the running ampacity of inductive loads to reduce cost and provide improved over current protection. These fuses will override normal equipment current surges to reduce unnecessary fuse openings. They are the most popular fuses used in the industry and the most economical for most applications, especially motors and transformers. They have moderate current limitation.

EATON Edison Bullet™ Time Delay Fuse, Current Limiting, Series: ECSR, Non-Indicating, Rejection, 100 A, 600 VAC, 200 kA Interrupt, Class: RK5, 10 s at 500% Response, Blade End x Blade End Terminal, Holder Mounting, Bullet/Cylindrical Body, Dual Element, Fiberglass, 1.11 in Dia x 7.88 in L Body

Amperage Rating      :      100 A
Body Size      :      1.11 in Dia x 7.88 in L
Body Type      :      Bullet/Cylindrical
Class      :      RK5
Element      :      Dual
Indicating/Non-Indicating      :      Non-Indicating
Interrupt Rating      :      200 kA
Material      :      Fiberglass
Mounting Type      :      Holder
Rejection/Non-Rejection      :      Rejection
Response Time      :      10 s at 500%
Series      :      ECSR
Terminal Type      :      Blade End x Blade End
Type      :      Current Limiting
Voltage Rating      :      600 VAC
  • True dual element construction allows sizing of 125% FLA for motor backup protection
  • Superior overload and cycling capabilities
  • Current limiting provides component short circuit protection
  • Provides motor overload ground fault and short circuit protection
  • Provides a good deg of short circuit protection (greater current limitation to help protect downstream components from high fault current
  • The time delay feature makes it possible to use fuse amp ratings, which are much smaller than those of non-time delay fuses
  • Considerable cost saving occurs by permitting the use of smaller size switches, panels and fuses themselves
  • Helps protect motors against burnout from overloads and single phasing when sized properly
  • Gives motor running back-up protection to motors without extra costs
  • pdfCatalog https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_0c0de146cabb72f7f0a5966ed00ceb865667fe788b2fe7e023384c367d42066d.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_11613eccbe6f76df5fb23c0b0d7df579bedcb676d65b1c2be7ebd66986959811.pdf