LEVODS10IDT
Leviton® Decora® ODS10-IDT 1-Pole Occupancy Sensor, 120/230/277 VAC, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, Wall Mount
- Manufacturers: Leviton
- Brand Name: Leviton®
- BPN: LEVODS10IDT
- MPN: ODS10-IDT
- UPC:078477277461
- Min. Order Qty: 1
- Qty. Interval: 1
-
Available at this location:
--
-
Login for Price
- Submit Slang Term
The ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
Leviton® Decora® Occupancy Sensor, 1-Pole, 120/230/277 VAC, 100/250 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mount, 0 to 50 deg C, Light Almond, 46 in H x 1.75 in W x 1.85 in D
| Color | : | Light Almond |
| Control Output | : | Manual On/Automatic Off |
| Coverage | : | 2100 sq-ft |
| Dimensions | : | 46 in H x 1.75 in W x 1.85 in D |
| Lamp Type | : | Fluorescent/Incandescent |
| Mounting Type | : | Wall |
| Power Rating | : | 100/250 mW |
| Response Frequency | : | 50/60 Hz |
| Sensor Type | : | PIR |
| Temperature Rating | : | 0 to 50 deg C |
| Time Delay | : | 30 s to 30 min |
| Type | : | 1-Pole |
| Viewing Angle | : | 180 deg |
| Voltage Rating | : | 120/230/277 VAC |
- Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive "scanning-device" look
- Convenient pushbutton provides manual ON/Off light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected
- Vandal-resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold Off feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns Off, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- 1-unit can be used for 120 to 277 VAC lighting
- Compatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
Instruction/Installation Manual