The EK4136S is an electronic photo control that fits standard 1/2 in knockouts in standard outlet boxes and wall pack lighting fixtures. it is made with a uv stabilized, high impact plastic housing that stands up to outdoor environment and features a silicon light sensor with a zero-crossing circuit to provide a long service life.

Intermatic® Stem Mounting Photocontrol, Electronic, HID/LED Fixture, 105 to 305 VAC, 6 A, 50/60 Hz, 1000 W Tungsten, 1800 VA Ballast, 2 to 5 s, 18 AWG Wire, Solid State/Silicon IR Filter Sensor, 1.5 FC ON/2.25 FC OFF, NEMA 4/10, Environmental Conditions: -40 to 158 deg F Operating Temperature, 1000 Operating Cycles, Stem Mount, Plastic, Gray, 2.25 in H x 1.3 in W x 1.24 in D

• <0.5 W power consumption at 277 VAC poW power consumptioner consumption
• Electronic control source
• Long life, electronic photocell, zero cross technology
• LED fixtures totaling 1650 W at 277 VAC, fail mode on, side lens, UV stabilized
• Employs electronic components exclusively selected to meet extended life targets
• Conformal coated PCB assemblies for long term
• 255 J MOV surge protection component
• Non-drifting silicon light sensor IR filtered for human eye response
• Zero cross technology helps device withstand severe inrush current and extend relay life
• Long life, electronic photocell, zero cross technology, LED fixtures totaling 1650 W at 277 VAC, fail mode on, side lens, UV stabilized
• 6 in lead wire

• Catalog IDW_DOCUMENT_ed85bf8bfde807bcb602ed8956a5c3147a03d5a01d4d1dd19b119b47c2284925.pdf
• Instruction/Installation Manual Intermatic_EK4136S_Instruction_Installation_Sheet.pdf
• Specification Sheet IDW_DOCUMENT_ad26de545e7dde90d4ac2ec1dd7f37310623121c2fb5b3dbcfd2ddae23a43a19.pdf