Edwards 2400 series temporal horns and temporal horn-strobes are designed for use with compatible life safety communication and control equipment to alert occupants of a life safety event. The horn emits up to a 95 dB (at 1 m) low frequency sound, and must be connected to signal circuits that output a constant (not pulsed) voltage. A diode is used to allow full signal circuit supervision. The strobes are designed to flash at the same rate (synchronize) when used with a compatible synchronization source, such as the EG1M-RM synchronization module, E-FSC and E-FSA fire panels, and EBPS series booster supplies. The plastic housing is made from durable and fire retardant, high impact plastic with a slightly textured surface. The mounting plate firmly holds the device in place with a single screw. A separate trim plate is not required. Terminals accept up to #12 AWG (2.5mm2 ) wire for polarized connections.

Edwards Signaling™ Temporal Horn/Strobe, Field Programmable, Series: 2400, 24 VDC, 0.15 A, Xenon Lamp, Red Lens, Low Frequency Sound, 95/85 dB Sound Level, Specifications Met: UL 1971, 1638, 464, 60 fpm Flash, 15/75 cd Light Output, Flush Mounting, -31 to 150 deg F, Plastic, 5-1/2 in L x 5-1/2 in W x 2-3/8 in D Dimensions

• Synchronized audible and synchronized visual signal
• Supervised wiring
• Terminals for easy wiring

• Catalog https://assets.unilogcorp.com/2/ITEM/DOC/Edwards_Signaling_2447TH_R_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/Edwards_Signaling_2452THS_15_75_R_Installation_Sheet.pdf
• Owners/User Manual https://assets.unilogcorp.com/2/ITEM/DOC/Edwards_Signaling_2447TH_R_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/Edwards_Signaling_2447TH_R_Datasheet.pdf