piwik image

C910-485 Raychem®
Send Print
  1. pin-int

RHSC910485

Raychem® ETI® C910-485 1-Point Compact Heating Cable Controller, 0 to 200 deg F

  • Manufacturers: nVent
  • Brand Name: Raychem®
  • BPN: RHSC910485
  • MPN: C910-485
  • UPC:715629007339
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

The Raychem C910-485 is a compact, full featured, microprocessor-based, single-point commercial heating cable controller. The C910-485 provides control and monitoring of electrical heating cable circuits for commercial heating applications, with built-in 30 mA ground-fault protection and RS-485 communication capability. The C910-485 can be set to monitor and alarm for high and low temperature, high and low current, ground-fault level, and voltage.

Raychem® ETI® Heating Cable Controller, 1-Point Compact, 0 to 200 deg F Control Range, 100 to 277 VAC, 30 A, Digital, 22 to 8 AWG Screw/14 to 6 AWG Two Box Lug, 1 in H x 8-1/2 in W x 6-1/4 in D, Fibre Reinforced Plastic

Amperage Rating      :      30 A
Control Range      :      0 to 200 deg F
Dimensions      :      1 in H x 8-1/2 in W x 6-1/4 in D
Display Type      :      Digital
Electrical Connections      :      22 to 8 AWG Screw/14 to 6 AWG Two Box Lug
Material      :      Fibre Reinforced Plastic
Type      :      1-Point Compact
Voltage Rating      :      100 to 277 VAC
  • Ready to install right from the box, eliminating the need for custom panel design or field assembly
  • The FRP NEMA 4X rated, enclosure is approved for use in indoor and outdoor locations
  • Alarm conditions and programming settings are easy to interpret on the full-text front panel
  • Supports Modbus protocol and includes an RS-485 communications interface
  • Raychem ProtoNode multi-protocol gateways are available to integrate up to eight C910-485 controllers into BACnet, Metasys N2 and LonWorks BMS systems
  • Double-pole, mechanical relay
  • Diagnostic test interval adjustable from 1 to 240 min or 1 to 240 hr
  • Modbus RTU/ASCI I protocol
  • Multidrop, daisy chain topology
  • Password protection
  • Low/high temperature, low current, ground fault alarm
  • Programmable keypad
  • Heater on, alarm condition, receive/transmit data on LED
  • Non-volatile, restored after power loss, checksum data checking memory
  • Isolated solid state triac, SPST, 0.75 A maximum
  • 20 to 100 mA trip
  • 0 to 200 deg F high alarm