piwik image

8426-11 3M™
Send Print
  1. pin-int

MMM842611

3M™ 8426-11 8420 Splice Cold Shrink Connector Insulator, 30.1 mm Dia Min, 13.9 mm Dia Max, 1400 psi Tensile Strength, EPDM Rubber Insulation

  • Manufacturers: 3M
  • Brand Name: 3M™
  • BPN: MMM842611
  • MPN: 8426-11
  • UPC:054007344582
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

The cold shrink connector insulator 8420 maintains prolonged pressure and resiliency while it offers improved moisture tight sealing. You'll want this product in jobs like insulating secondary splices, submersible, direct buried or dig-in repairs, and the physical protection of lugs or connectors of a higher voltage. This black insulator is ANSI certified and RoHS 2011/65/EU Compliant.

3M™ Cold Shrink Connector Insulator, Splice, Series: 8420, 30.1 mm Diameter Minimum, 13.9 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black

Color      :      Black
Dielectric Strength      :      365 V/mil
Elongation      :      7.5
Material      :      EPDM Rubber Insulation
Maximum Diameter      :      13.9 mm
Minimum Diameter      :      30.1 mm
Series      :      8420
Tensile Strength      :      1400 psi
Type      :      Splice
  • Simple installation, requires no tools and accommodates a wide-range of cable sizes
  • Copper conductor with polyolefin foam
  • No torches or heat required, good thermal stability
  • Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
  • Excellent wet electrical properties
  • Tough rubber formulation withstands backfilling
  • Water-resistant, no mastic or tape required to seal
  • Resists acids, alkali and ozone
  • Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts
  • Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
  • Insulation of secondary splices, copper or aluminum conductors
  • Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
  • Insulation of in-line conductor transition connectors
  • -40 to 194 deg f temperature rating, 1 kV voltage rating
  • UniShield®, wire shield, non-shielded, tape shield cable
  • 11 in relaxed tube length, 7 in max connector length
  • 0.55 min Dia cable for seal, 1.18 in Dia insulator cable or connector covers
  • 2/0 AWG to 250 kcmil conductor size
  • One conductor, 250 kcmil, 2/0 AWG, 3/0 AWG, 4/0 AWG conductor size
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_c16880853e626773776987a771760a4df0b93b37709720408b281c9f01705fde.pdf
  • pdfLine Drawing https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_e3be9b352b78cba6ba15cbd3f36f8771603980d78428e343886f2d37d8fc3e81.pdf
  • pdfSDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_dbcdd296a8e947aabc80cbb392c2b75076b34dbf903c357500b17c71cf1d20fb.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_488b9f8e0da05715ee0459eb0f04af2eb14a42f4492db1301bb1aebb5a47fd6c.pdf