NEC Article 210.63 requires that a 125 V, 1-phase, 15 A or 20 A rated receptacle outlet be installed at an accessible location for the servicing of heating, air-conditioning and refrigeration equipment. The receptacle must be located on the same level and within 25 ft of the heating, air-conditioning and refrigeration equipment. EATON heavy duty safety switch is an ideal solution for these applications, including elimination of the need for running a separate 120 V circuit to the rooftop.

EATON Safety Switch, Heavy Duty Non-Fusible Single Throw, Series: DH Series, 600 VAC, 30 A, 30 hp, 3 ph, 3 Pole, 3 Wires, TPST, NEMA 3R, Panel Mount, 16.5 in L x 9.12 in W x 8.31 in H, Steel, Galvanized/Painted

• Fusible and non-fusible switches are 100% load break and 100% load make rated
• Non-fusible switches are 100% fully rated
• Suitable for service entrance applications unless otherwise noted
• Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
• Mechanically interlocked cover to prevent easy access when the switch is in the ON position
• Clearly visible palm fitting red handle
• Premium 316 grade stainless steel enclosures offer better corrosion-resistance in the presence of most chemicals, salts and acids and is more-resistant to marine atmospheres
• Visible double-break quick make, Quick-break blades
• Visible ON/OFF indications
• 30 to 1200 A NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole
• Tri-lingual nameplates
• Design for all series K heavy duty

• Catalog https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_44f85e021903699428c7decf474100a230319e0aa16f8792d2a2183ca227a751.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_28efc5e3ec764cc48c531f889cae3c59bcb110beb594840c13ed75b6aa7ffd8f.pdf