piwik image

61-757 IDEAL®
Send Print
  1. pin-int

IDE61757

IDEAL® TightSight® 61-757 Digital Clamp Meter With Backlit, Flashlight, 600 VAC, 600 A, 60 MOhm, 10 to 9999 Hz, 1.4 in Jaw, Backlit LED Display

  • Manufacturers: Ideal Industries
  • Brand Name: IDEAL®
  • BPN: IDE61757
  • MPN: 61-757
  • UPC:783250513581
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

The IDEAL® 61-757 TightSight® Clamp Meter is a Cat IV 600 Cat III 1000 V rated auto ranging true root mean square (TRMS) digital clamp meter that measures up to 600 A AC and DC current via the clamp head. It measures up to 1000 VAC and DC, Low Impedance AC Voltage (Lo Z) (to reduce the possibility of false readings due to ghost voltages) , frequency, resistance, continuity, capacitance, and diodes via test leads (included) and measures temperature deg F/deg C via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40 to 600 V via a non-contact sensor in the right tip of the clamp. The patented TightSight® LCD Display, located on the bottom of the unit, enhances safety and productivity by displaying a secondary reading at the end of the meter, eliminating the need to bend or twist conductors or place you head near the panel in order to see the main meter display. Both displays can be backlit, and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 V, when continuity is detected and when the NCV senses voltage within its set range. The clamp head has a built-in probe tip holder on the backside of the right clamp to allow measurements holding the clamp in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL® meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. An industrial grade over molding enhances grip and drop protection. This meter features HOLD, MIN/MAX, Relative, Zero, Range, and selectable Auto Power Off functions. The meter comes with 3 1.5 V AAA Batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probe and thermocouple storage.

IDEAL® TightSight® Clamp Meter, Digital, 600 VAC, 600 A Electrical Rating, 60 MOhm Resistance, 10 to 9999 Hz Frequency, 1.4 in Jaw, 6000 Count, Backlit LED Display, True RMs AC Response, +/-2% + 9 AC Current Accuracy, +/-1.5% + 5 Voltage Accuracy, Frequency Counter: +/-0.1% + 5, Safety Rating: CAT IV 600 V, CAT III 1000 V, (3) 1.5 V AAA Battery Power Source, -40 to 1832 deg F Operating, 9.9 in L x 2.8 in W x 1.8 in H Dimensions

AC Current Accuracy      :      +/-2% + 9
AC Response      :      True RMs
Counts      :      6000
Dimensions      :      9.9 in L x 2.8 in W x 1.8 in H
Display Type      :      Backlit LED
Electrical Ratings      :      600 VAC, 600 A
Frequency Counter      :      +/-0.1% + 5
Frequency Rating      :      10 to 9999 Hz
Jaw Capacity      :      1.4 in
Operating Temperature      :      -40 to 1832 deg F
Power Source      :      (3) 1.5 V AAA Battery
Resistance      :      60 MOhm
Safety Rating      :      CAT IV 600 V, CAT III 1000 V
Type      :      Digital
Voltage Accuracy      :      +/-1.5% + 5
  • Provides true RMs AC voltage and current for accurate measurements on non-linear signals
  • Built-in probe tip holder and hanging strap clip allows safer, easier measurement
  • Built-in flashlight and dual backlit displays allow for safer/faster work in poorly lit environments
  • Over molded Industrial design enhances gripping and allows the meter to withstand a 6.6 ft (2 m) drop
  • Patented TightSight® display eliminates the need to bend or twist conductors or place your head near or in the panel and allows you to easily read the bottom display when taking measurements