The IDEAL® 61-415 TightSight® Split Jaw Meter is a Cat IV 600V, Cat III 1000 V auto ranging true root mean square (TRMS) digital fork meter that measures up to 200 A AC or DC between the forks. It measures up to 1000 VAC and DC, continuity, resistance, capacitance, and diodes via test leads (included) and detects the presence of voltage between 40 to 600 V via a non-contact sensor in the tip of the right fork. The Dual large displays can be backlit, and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 V, when continuity is detected and when the NCV senses voltage within its set range. The back of the meter has a built-in two position dual probe holder, the lower position allows for probe storage, the higher position allows for testing or measurement holding the meter and secured probe in one hand and the second probe in the other hand, or for both probes to be secured in the tip while conducting measurements. The meter has a hanging strap mount (compatible with all other IDEAL® meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. This meter features HOLD, MIN/MAX, Relative, Range, and selectable Auto Power Off functions. The meter comes with 3 1.5 V AAA Batteries and an easy open, fully accessible storage pouch with a belt loop that allows for storage.

IDEAL® TightSight® Split Jaw Meter, Digital, 600 VAC, 200 A Electrical Rating, 60 MOhm Resistance, 50/60 Hz Frequency, 3/4 in Jaw, 6000 Count, Backlit LED Display, True RMs AC Response, +/-2.5% + 5 AC Current Accuracy, +/-1% + 5 Voltage Accuracy, Safety Rating: CAT IV 600 V, CAT III 1000 V, (2) 1.5 V AAA Battery Power Source, 32 to 122 deg F Operating, 8.8 in L x 2.4 in W x 1.8 in H Dimensions

• Provides true RMs AC voltage and current for accurate measurements on non-linear signals
• Built-in probe tip holder and hanging strap clip allows safer, easier measurement
• Built-in flashlight and dual backlit displays allow for safer/faster work in poorly lit environments

• IDEAL_61_627_Catalog.pdf IDEAL_61_627_Catalog.pdf
• Catalog IDEAL_61_627_Catalog.pdf
• IDEAL_61_415_Manual.pdf IDEAL_61_415_Manual.pdf
• Instruction/Installation Manual IDEAL_61_415_Manual.pdf
• IDW_DOCUMENT_785e8886fd53fb87bc2bf98a888d86b1bc529daf979b10812668da2d0d57e56c.PDF IDW_DOCUMENT_785e8886fd53fb87bc2bf98a888d86b1bc529daf979b10812668da2d0d57e56c.PDF
• RoHS IDW_DOCUMENT_785e8886fd53fb87bc2bf98a888d86b1bc529daf979b10812668da2d0d57e56c.PDF
• IDEAL_61_415_Specification_Sheet.pdf IDEAL_61_415_Specification_Sheet.pdf
• Specification Sheet IDEAL_61_415_Specification_Sheet.pdf
• IDEAL_61_627_Warranty.pdf IDEAL_61_627_Warranty.pdf
• Warranty Information IDEAL_61_627_Warranty.pdf