piwik image

1002P1 Signify Luminaires
Send Print
  1. pin-int


Signify Luminaires Lightolier Lytecaster® 1002P1 Non-IC Round Standard Frame-In Kit, Incandescent Lamp, 120 VAC, 5-1/8 in Ceiling Opening, Galvanized Steel Housing

  • Manufacturers: Signify
  • Brand Name: Signify Luminaires
  • BPN: LOL1002P1
  • MPN: 1002P1
  • UPC:784197120078
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Lytecaster® 1002P1 5 in Non-IC Standard Frame-In Kit is made of 20 ga galvanized steel and will accommodate existing ceilings up to 1 in THK. Non-IC designation requires that insulation must be kept a minimum of 3 in away from housing. Lamp type and wattage dependent on frame-in kit/trim combination. A complete fixture includes a frame-in kit and a trim kit, sold separately.

Signify Luminaires Lightolier Lytecaster® Frame-In Kit, Non-IC Round Standard, 120 VAC, 5-1/8 in Ceiling Opening, Incandescent Lamp, 75 W Lamp, 1 Lamps, Ceiling/Recessed Mounting, 5 in Diameter, For Use With: Recessed Downlight, 14.19 in Height, 12-3/4 in Width, 7-1/2 in Depth, Galvanized Steel Housing Material

Ceiling Opening      :      5-1/8 in
Depth      :      7-1/2 in
Diameter      :      5 in
Height      :      14.19 in
Housing Material      :      Galvanized Steel
Lamp Type      :      Incandescent
Lamp Wattage      :      75 W
Mounting Type      :      Ceiling/Recessed
Number of Lamps      :      1
Suitable For Use With      :      Recessed Downlight
Type      :      Non-IC Round Standard
Voltage Rating      :      120 VAC
Width      :      12-3/4 in
  • 1 x PAR38 medium E26 bulb shape
  • 20 AWG galvanized steel mounting frame
  • Accommodates all ceilings up to 1 in THK
  • Push-in/twist-out clips hold reflector flush to ceiling
  • Four slots are positioned 90 deg apart to simplify alignment
  • AWG 14 galvanized steel junction box
  • 75 deg C through branch circuit conductors
  • Integral cable clamps permit attachment of non-metallic Romex® or armored cable without need of additional connectors
  • AWG 16 galvanized steel mounting bars
  • Attaches to wood joist without need of accessories
  • 13 in L bars extend to 27 in with integral nailing tabs
  • Impact extruded aluminum or galvanized steel socket housing
  • Porcelain medium base, nickel plated screw shell socket
  • Pre-wired with AWG 18 SF1 leads to junction box
  • Thermal protector insulation must be kept 3 in away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat
  • Dimming capability
  • pdfCatalog Lightolier_1002P1_Specification_Sheet.pdf
  • pdfSpecification Sheet IDW_DOCUMENT_8e08ca436a0226303ef9b0888235207f9bf8bb38d59cc9e5d5329ee8f3afd0b4.pdf