The EcoSystem® to 0 to 10 VDC, interface provides a control gateway from an EcoSystem® link to a 0 to 10 VDC, compatible lighting device, typically an LED driver. It allows for individual addressing of the 0 to 10 VDC device, but provides only one way communication from the controls to the 0 to 10 VDC device. This interface is suggested for single fixture control only. For multiple fixture control or for fixtures with multiple ballasts/drivers, please contact Lutron®.

Lutron® EcoSystem® Lighting Interface, 120/220 to 240/277 VAC, 25 mA, 2 A, <=1 W Power, Threaded Mounting, -4 to 167 deg F, 4.9 in L x 3 in W x 1 in D Dimensions

• EcoSystem® control gear compatible works with Grafik Eye® QS control unit with EcoSystem®, Quantum® system, Energi Savr Node™ unit with EcoSystem®, PowPak® module with EcoSystem®
• Occupies one EcoSystem® unit address
• Operates at 120, 220/240, 277 VAC input and provides one 120, 220/240 or 277 VAC switched output
• Provides one 0 to 10 VDC low voltage IEC PELV/NEC Class 2 control output for devices compliant with IEC 60929 Annex E2 ("Control by DC voltage")
• Switches up to 2 A of NEMA 410 compliant load
• Incorporates Lutron® Softswitch® technology allowing a minimum of 1000000 relay cycles

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_TVI_LMF_2A_Specification_Sheet.pdf