The LUT-ELI-3PH is a device that works with Lutron® lighting controls to provide an emergency lighting solution. The device is capable of sensing normal (non-essential) line voltage power and accepting an output from a fire alarm control panel (FACP). Upon loss of normal power or receiving a signal from the FACP, the LUT-ELI-3PH will send a signal to the compatible Lutron® controls ) to which it is connected. This signal will cause the controls to enter the emergency lighting mode and any lights controlled will go to the emergency light level setting.

Lutron® Emergency Lighting Interface, Series: LUT-ELI, 100/347 VAC, 30 mA, Surface Mounting, 0 to 40 deg C, 7-3/4 in H x 5 in W x 2-1/2 in D Dimensions

• Compatible Lutron controls GP, LP, LCP, XP, XPS, CCP, CXP, HS and HomeWorks® rough-in panels, Energi Savr Node™ units, GRAFIK Eye® QS units, Quantum® lighting management hubs with EcoSystem® bus supplies
• Requires a 24 VAC power feed from a source on normal/emergency (essential) power for unit to operate
• Status light indicates the phase status, status light ON is normal mode, OFF is emergency mode
• A test button is provided to perform a functional test of the system by simulating an emergency situation
• Accepts a maintained dry contact closure from an FACP to actuate the emergency mode
• Senses line voltage from 100/347 VAC
• 50/60 Hz frequency
• Relative humidity less than 90% non-condensing

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_LUT_ELI_3PH_Data_Sheet.pdf