Lutron® Power Module, Phase Adaptive, 120 VAC, 16 A, 12 AWG Wire, White, 5.1 in H x 6.3 in W x 1.2 in D

• Provides capability for a zone on a GRAFIK Eye® control unit (or other product) to dim a fully loaded circuit of lighting
• May be used to control incandescent, electronic low voltage, magnetic low voltage and neon/cold cathode lighting sources, as well as Lutron® Tu-Wire® fluorescent dimming ballasts
• Automatically selects leading edge or trailing edge dimming for low voltage transformers
• Provides power and dimming for one zone
• Up to 3 power modules may be wired on a single GRAFIK Eye® zone
• Not for use with non-dim loads
• Automatically selects between forward phase/leading edge and reverse phase/trailing edge dimming based on load
• Passive infrared motion detection with exclusive Lutron® XCTTM technology for fine motion detection
• 0 to 40 deg C ambient operating temperature
• Relative humidity less than 90% non-condensing, indoor use only
• Provides air-gap off
• Module protects itself during temporary over current and over voltage conditions
• 120 VAC load power
• 50/60 Hz frequency

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_PHPM_PA_120_WH_Data_Sheet.pdf