piwik image

MRF2S-8SSV-IV Lutron®
Send Print
  1. pin-int


Lutron® Maestro® MRF2S-8SSV-IV 1-Pole Multi-Location Vacancy Sensor Switch, 120/277 VAC, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, Wall Mount

  • Manufacturers: Lutron Electronics
  • Brand Name: Lutron®
  • UPC:784276262361
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Lutron® Maestro® RF 0 to 10 VDC sensor dimmers/RF sensor switches are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. Features Lutron® Clear Connect® RF technology, which enables wireless communication with radio Powr Savr™ sensors and Pico® remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time, however system reprogramming will be required.

Lutron® Maestro® Vacancy Sensor Switch, 1-Pole Multi-Location, Series: MRF2S-8SSV, 120/277 VAC, 8 A, 1 hp, 6 hp, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Delay, Fluorescent/LED Lamp, 434 MHz Response, Neutral Wire, Manual On/Automatic Off Control Output, Wireless RF Interface, Wall Mount, 32 to 104 deg F, Ivory, 4-11/16 in L x 2-15/16 in W

Amperage Rating      :      8 A
Color      :      Ivory
Connection Type      :      Neutral Wire
Control Output      :      Manual On/Automatic Off
Coverage      :      400 sq-ft Minor, 900 sq-ft Major
Dimensions      :      4-11/16 in L x 2-15/16 in W
Interface      :      Wireless RF
Lamp Type      :      Fluorescent/LED
Mounting Type      :      Wall
Power Rating      :      1 hp, 6 hp
Response Frequency      :      434 MHz
Sensor Type      :      Passive Infrared
Series      :      MRF2S-8SSV
Temperature Rating      :      32 to 104 deg F
Time Delay      :      10 s
Type      :      1-Pole Multi-Location
Viewing Angle      :      180 deg
Voltage Rating      :      120/277 VAC
  • Controls 0 to 10 VDC electronic fluorescent ballasts or LED driver load types
  • Passive infrared motion detection with exclusive Lutron® XCT™ technology for fine motion detection
  • 180 deg sensor field of view
  • Up to 30 x 30 ft (900 sq-ft) major motion coverage and 20 x 20 ft (400 sq-ft) minor motion coverage
  • Occupancy version can be set to auto-on/auto-off or manual-on/auto-off
  • Adjustable timeout (1, 5, 15 or 30 min)
  • Adjustable settings for auto-on light level (occupancy level) fully adjustable from 1 to 100%
  • Adjustable settings for auto-off light level (vacancy level) fully adjustable from 0 to 100%
  • High, medium, low, minimum adjustable sensitivity level
  • Off warning fades lights to off over a period of 10 s
  • Adaptive switching algorithm for extended relay life
  • Smart ambient light detection (ALD)
  • Works with up to 10 Pico® remote controls, 1 Radio Powr Savr™ daylight sensor and 10 Radio Powr Savr™ PIR sensors
  • High end trim and low end trim to adjust maximum and minimum light levels
  • For all lighting loads and fan loads up to 4.4 A
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_MRF2S_8SDV010_AL_Specification_Sheet.pdf
  • pdfWarranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_MRF2S_8SDV010_AL_Warranty.pdf