piwik image

Cart (0) Items
EC5NST554CU210R Lutron®
Lutron® EC5NST554CU210R LUTEC5NST554CU210R
Send Print
  1. pin-int

LUTEC5NST554CU210R

Lutron® EcoSystem® EC5NST554CU210R 3-Wire 5-Control C-Type Case Replacement Universal Digital Dimming Ballast, T5 Linear Fluorescent Lamp, 54 W Lamp, 120/240/277 VAC, Programmed/Rapid, 1 Ballast Factor

  • Manufacturers: Lutron Electronics
  • Brand Name: Lutron®
  • BPN: LUTEC5NST554CU210R
  • MPN: EC5NST554CU210R
  • UPC:784276219679
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Digital electronic dimming ballasts maximize the benefits of a lighting management system. EcoSystem® ballasts offer 100 to 10% dimming and ideal for use where saving energy, increasing flexibility and maximizing productivity are the goals of the lighting design.

Lutron® EcoSystem® Digital Dimming Ballast, 3-Wire 5-Control C-Type Case Replacement Universal, T5 Linear Fluorescent Lamp, 54 W Lamp, 119.1/120/122.4 W, 120/240/277 VAC, 0.43/0.5/1.02 A, 50/60 Hz, Programmed/Rapid Start, 50 deg F Minimum Starting, Total Harmonic Distortion: <10%, Power Factor: 0.95, Dimmable: Yes, 2 Lamps, Thermal Protection: Class P, Ballast Factor: 1, 167 deg F, Threaded Mount, 9.5 in L x 2.38 in W x 1 in H

Amperage Rating      :      0.43/0.5/1.02 A
Ballast Factor      :      1
Dimensions      :      9.5 in L x 2.38 in W x 1 in H
Dimmable      :      Yes
Frequency Rating      :      50/60 Hz
Lamp Type      :      T5 Linear Fluorescent
Lamp Wattage      :      54 W
Minimum Starting Temperature      :      50 deg F
Mounting Type      :      Threaded
Number of Lamps      :      2
Power Factor      :      0.95
Start Type      :      Programmed/Rapid
Temperature Range      :      167 deg F
Thermal Protection      :      Class P
Total Harmonic Distortion      :      <10%
Type      :      3-Wire 5-Control C-Type Case Replacement Universal
Voltage Rating      :      120/240/277 VAC
Wattage      :      119.1/120/122.4 W
  • Continuous, flicker free dimming from 100 to 10%
  • Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor and one personal control input (infrared receiver or wallstation)
  • Communicates status and sensor inputs over the EcoSystem® digital link
  • Programmed rapid start design ensures full rated lamp life while dimming and cycling
  • Lamps turn on to any dimmed level without flashing to full brightness
  • Low harmonic distortion throughout the entire dimming range
  • Frequency of operation ensures that ballast does not interfere with infrared devices
  • End of lamp life protection circuitry ensures safe operation throughout entire lamp life
  • Ultra quiet operation
  • Non-volatile memory restores all ballast settings after power failure
  • Ballasts maintain consistent light output for linear lamp lengths
  • Protected from miswires of any input power to control lead or from lamp leads to each other and ground
  • 100% performance tested at factory
  • Without sensor
  • 1.02 A at 120 VAC, 0.5 A at 240 VAC, 0.43 A at 277 VAC
  • 122.4 W at 120 VAC, 120 W at 240 VAC, 119.1 W at 277 VAC
  • pdfInstruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_EC5NST528CU110R_Manual.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_EC5NST528CU110R_Specification_Sheet.pdf