piwik image

LRD-WST-F-MN Lutron®
Send Print
  1. pin-int


Lutron® SeeTemp™ LRD-WST-F-MN Designer Wall Display, 120 VAC

  • Manufacturers: Lutron Electronics
  • Brand Name: Lutron®
  • UPC:027557800495
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Add Lutron® comfort controls to your light and shade/drapery systems for convenient control of all aspects of an environment-natural light, artificial light and temperature from the touch of a button. Lutron® comfort controls allow heating and cooling systems to integrate seamlessly with Lutron® systems and must be located within 30 ft (9 m) of an RF signal repeater. The seeTemp™ wall display provides control of thermostat settings from a convenient location. Its sleek design blends in with the decor while the intuitive interface shows the current temperature and set point at a glance. System mode buttons are available and concealed by a door that opens 180 degrees for easy access. Press the "eco" button on the seeTemp™ wall display to trim HVAC settings automatically. The "eco" button trim is controlled by RadioRA® 2 and HomeWorks® QS systems. Lutron® comfort controls can only be used in systems that are programmed using the PC programming tool.

Lutron® SeeTemp™ Wall Display, Designer, Series: LRD-WST, Wall Box Mounting, 1 W Pressure, 120 VAC, 50/60 Hz Frequency Response, 0 to 40 deg C, Intuitive Interface, 4-11/16 in H x 2-15/16 in W x 1-1/4 in D Dimensions, Environmental Conditions: 0 to 90% Non-Condensing Humidity

Dimensions      :      4-11/16 in H x 2-15/16 in W x 1-1/4 in D
Environmental Conditions      :      0 to 90% Non-Condensing Humidity
Frequency Response      :      50/60 Hz
Interface      :      Intuitive
Mounting Type      :      Wall Box
Pressure Rating      :      1 W
Series      :      LRD-WST
Temperature Rating      :      0 to 40 deg C
Type      :      Designer
Voltage Rating      :      120 VAC
  • Designer or architectural style opening that can be ganged with other devices like dimmers and keypads
  • Installs in a standard wall box for low profile appearance
  • Multiple seeTemp™ wall displays can be used to control 1 HVAC controller or TouchPRO® wireless™ thermostat from multiple locations
  • Pressing the "eco" button saves energy by trimming the temperature a programmed amount, default is +/- 2 deg F
  • 120 VAC wiring requires hot and neutral wiring
  • Midnight color