RadioRA® 2 RF plug-in modules are simple to install and easy to use. RF plug-in modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect® RF techn

Lutron® RF Plug-in Appliance Module, 120 VAC, 15 A, 0.3 W Power, 32 to 104 deg F, Midnight, 3.25 in H x 2.25 in W x 1.23 in D Dimensions

• On a single tap of the toggle button, load toggles ON or OFF
• The appliance module may be used with, but is not limited to, the following, task lighting, humidifiers, monitors, fans, printers
• Shut down process before power is interrupted, such as computers, cool down process before power is interrupted, such as projectors, programming, such as clocks or DVRs, long warm up cycle
• If an over temperature condition is detected, the LED on the unit will flash a unique sequence (double blink, then pause) and turn the load off
• Proper installation and conformance to all specifications should be ensured before proceeding, to return the device to normal operation, cycle power to the device

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_RR_15APS_1_MN_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_RR_15APS_1_MN_Specification_Sheet.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_RR_15APS_1_MN_Warranty.pdf