piwik image

Cart (0) Items
SCR-15-GFST-MS Lutron®
Lutron® SCR-15-GFST-MS LUTSCR15GFSTMS
Send Print
  1. pin-int

LUTSCR15GFSTMS

Lutron® Claro® Satin Colors® SCR-15-GFST-MS SCR-15-GFST Designer Style Self-Testing Tamper-Resistant GFCI Receptacle With Claro® Wallplate, 125 VAC, 15 A, Mochastone

  • Manufacturers: Lutron Electronics
  • Brand Name: Lutron®
  • BPN: LUTSCR15GFSTMS
  • MPN: SCR-15-GFST-MS
  • UPC:784276159012
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Lutron® Claro® Satin Colors® GFCI Receptacle, Designer Style Self-Testing Tamper-Resistant, Series: SCR-15-GFST, 125 VAC, 15 A, 60 Hz Frequency, -30 to 150 deg F, Back/Side Wire Terminal, Mochastone, 4.69 in H x 2.94 in W x 1.47 in D Dimensions

Amperage Rating      :      15 A
Color      :      Natural White
Dimensions      :      4.69 in H x 2.94 in W x 1.47 in D
Frequency Rating      :      60 Hz
Material      :      Plastic
Series      :      SCR-15-GFST
Temperature Rating      :      -30 to 150 deg F
Terminal Type      :      Back/Side Wire
Type      :      Designer Style Self-Testing Tamper-Resistant
Voltage Rating      :      125 VAC
  • Three provisions for providing protection:- continuous electronic sensing, testing and evaluation utilizing diagnostic software located on the printed circuit board
  • Traditional testing mode by manually operating the "test and reset" buttons utilizing a supervisory circuit as specified in UL 943 section 5.15
  • Continuous self-test functionality, disconnects power to receptacle if critical components are damaged and GFCI protection is lost, providing "continuous self-testing" that initiates within 2.5 sec and is a continuous cycle every 30 sec or less
  • Auto-sensing mode for immediate interruption for a ground fault condition for class A protection (4 to 6 mA)
  • Manual test, this design incorporates a full system test function, the GFCI, when manually tested, induces a simulated ground fault leakage current to the printed circuit board, this in turn causes the mechanical system to react based on the action of the
  • The entire mechanical and electronic GFCI system is reviewed for functionality
  • Reverse wire safety feature, if wired incorrectly there will be no power to the face or to downstream receptacles for added safety
  • Clear visual indication of GFCI status, LED indicating lights:- green LED (power to the device), red LED (trip condition/ground fault condition), flashing red LED (end of life)
  • Permanently installed internal tamper-resistant shutter mechanism capable of resisting insertion of foreign elements into the device
  • Internal back wiring clamp and guide, pocket quick and dependable termination
  • Receptacle face compatible with NEMA designer and Nova T® designer opening wallplates
  • pdfInstruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_SCR_15_GFST_HT_Manual.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_SCR_15_GFST_HT_Specification_Sheet.pdf
  • pdfTechnical Bulletin https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Lutron_SCR_15_GFST_HT_Technical_Bulletin.pdf