piwik image

Cart (0) Items
OSP10M-W EATON
EATON OSP10M-W CWDOSP10MW
Send Print
  1. pin-int

CWDOSP10MW

EATON OSP10M-W 1-Pole 1-Phase Passive Infrared Occupancy Sensor, 120/277 VAC, 1000 sq-ft Coverage, 180 deg Viewing, Wall Mount

  • Manufacturers: Eaton
  • Brand Name: EATON
  • BPN: CWDOSP10MW
  • MPN: OSP10M-W
  • UPC:032664729386
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Available at this location: loading -- Locations

Eaton occupancy sensor switch, Decorator, Flush, 120/277 V, Wire ld, Main close, Almond, Inc MLV ELV Flr Halo CFL LED Elec mtr lds, 1-pole, 3way, 1-ph, 1000 sq-ft, 2-rly, 800 W(Inc/hal at 120 V) 1200 W(Flr at 120 V) 2200 W(Flr at 277 V) 729362.

EATON Occupancy Sensor, 1-Pole 1-Phase Passive Infrared, Series: OSP10M, 120/277 VAC, 800 W Power, 1000 sq-ft Coverage, 180 deg Viewing, 30 min Time Delay, Incandescent/Halogen Lamp, 60 Hz Response, Wire Lead Connection, Manual On/Automatic Off/Automatic On/Automatic Off Control Output, Wall Mounting, 0 to 40 deg C, Polycarbonate, White, 2.6 in H x 1.55 in W x 1.85 in D Dimensions

Color      :      White
Connection Type      :      Wire Lead
Control Output      :      Manual On/Automatic Off/Automatic On/Automatic Off
Coverage      :      1000 sq-ft
Dimensions      :      2.6 in H x 1.55 in W x 1.85 in D
Lamp Type      :      Incandescent/Halogen
Material      :      Polycarbonate
Mounting Type      :      Wall
Power Rating      :      800 W
Response Frequency      :      60 Hz
Series      :      OSP10M
Temperature Rating      :      0 to 40 deg C
Time Delay      :      30 min
Type      :      1-Pole 1-Phase Passive Infrared
Viewing Angle      :      180 deg
Voltage Rating      :      120/277 VAC
  • Selectable automatic ON mode or manual ON mode
  • Convenient installation and test mode for set-up
  • Adjustable, built-in light level sensor
  • Selectable time delay
  • For use with incandescent lamps, halogen fixtures, electronic and magnetic fluorescent, CFL, LED electrical motor loads
  • 120 and 277 VAC in the same unit
  • Three-way wiring
  • Manual OFF pushbutton can be used in either automatic or manual mode
  • Reinforced lens is tamper-resistant
  • Zero-crossing technology to maximize relay life and ensure wall switch longevity
  • Can control low voltage switchpacks
  • No neutral required
  • Adjustable, 5 min, 15 min, 30 min test time delay
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_d6c2ac8bca9ceaae52cc426a07cce4ab8f622b55f335d8c7f31225f9c24d142b.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_6e039b8b65206ca42e69e95308c8a03ae42c827712b1877709a92059b1b0c75a.pdf